Athlon model 6 to Mobile CPU
To make the CPU a mobile CPU, make sure the second-top-most L5 bridge is
joined. If it has been laser-cut, the gap can also be filled with some
conductive substance to connect it directly to ground.
When the CPU is in Mobile mode, the multiplier and VCore can be changed on the
fly through software. This, however, requires chipset support of PowerNow!,
which is not supported on every chipset.
Some BIOSes set the multiplier and voltage to maximum on boot, so the L6 and L8
bridges should be configured to avoid damage to the CPU. See "Set maximum
software multiplier" and "Set maximum software VCore" for details.
Set maximum software multiplier
Set maximum software VCore
Set maximum software VCore to 2.00V
Set maximum software multiplier to 24x
Mobile CPUs cannot do SMP